Call Us Now! +86157 0569 5515, +86159 5512 5448,+86152 5670 9748

Order Online Now! sunnytao@ahjnge.net.cn

wind solar hybrid controller
Products
New Products
  • Solar system
    Off Grid solar power system home 300w,500w,1kw,2kw 3kw,4kw,5kw,8kw,10kw customized

     Solar System characteristic: 1. All Systems have an LCD digital display which allows you to see the system working, (eg) Charge data, System voltage, Daily power consumption, and temperature. 2. All inverters are Pure Sine Wave inverters. This allows the use of Air Conditioners and refrigerators without any problem. 3. Each component has full protections, like Overloads, Low Voltage and Under Voltage (alarm) Over Heating, Short circuit, Reverse Polarity. 4. Your system can be updated very easily. Just by adding extra components your system will increase power capacity. 5. Battery optional, you can purchase from us or locally. 6. Simple to install, just follow installation instructions. 7. Our System offers Cutting Edge Technology, State of the Art Quality with Greater Functionality than our competitors, at Competitive prices.

  • wind solar hybrid charge controller
    The Latest Privilege Version MPPT Wind Solar Hybrid Charge Controller With Wifi/ GPRS Monitor

    > Remote Monitoring by 3 ways: PC monitoring; WIFI by mobile phone; GPRS by mobile phone. >This new wind solar hybrid controller is special design for 0-800w wind and 0-600w solar panels for wind >solar street light or home wind solar complementary system. >Appearance is elegant, operations are easy. Uses a custom digital LCD screen can see solar panel ,wind turbine, battery status and four key operation mode. The user to use simple and easy to use, popular and  >The inner circuit board of the controller is sprayed to prevent dust, moisture and static electricity, which can effectively prolong the controller' service life. >This controller can workable to Gel, Lead-acid, Ternary lithium battery and Lithium iron phosphate battery. >Lightning counter-attack, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, etc.

  • MPPT solar charge controller
    Mini MPPT Solar Charge Controller 10amp 20amp 30amp for solar power system

    Latest JN-MPPT-Mini MPPT solar charge controller ranges from 10amp 20amp 30amp with mini smart design for various use purpose . The battery system voltage is 12v 24v 48v auto recognize and max. PV input can be 150V. High charge efficiency is above 99.8% which is much cost-effective for project.

  • MPPT solar charge controller
    Latest MPPT Solar Charge Controller 30amp 40amp 50amp for solar power system

    Latest JN-MPPT-AL MPPT solar charge controller ranges from 30amp 40amp 50amp which are used for solar panel system . The battery system voltage is 12v 24v 48v auto recognize and max. PV input can be 150V. High charge efficiency is above 99.8% which is much cost-effective for project.

Hybrid inverter with built-in MPPT solar controller all on one

CM series hybrid  inverter with built-in MPPT solar controller all on one has the advantages of high efficiency, low power consumption and strong carrying capacity and more intelligent, User can set charging mode according to the usage environment, and the AC complementary output, the mode of AC or DC, it has the advantages of stable quality, strong load resistance, anti-adverse environment and long service life; it is the main product of our company’s power frequency pure sine wave inverter.

  • Place of Origin:

    china
  • Brand Name:

    JNGE POWER
  • Model Number :

    CM
  • Application:

    Household ,commercail and outdoot ect.
  • Rated Voltage:

    12/24/48/96v
  • System voltage:

    12-48v
  • Syetem current:

    30-120A
  • Certification:

    CE ROHS ISO
contact now User's Manual
  • product introduction
  • More Details
Product features                  
*Double intelligence in one machine: DC mode or AC mode;
*The sine wave isolation output, it can power continuously for a long time;
*Using a ring-frequency transformer, the lowest in the industry of no-load losses;
*Broken code LCD screen: graphical interfaces, give the user better use of the feeling
*External battery, user can match the corresponding battery capacity and quantity according to their own needs;
*Strong carrying capacity, except driving all kinds of resistance load, it can also drive all kinds of inductive load;
*The design of the power frequency circuit, the system stability is good, the failure rate is low, the service life is long;
*Perfect protection function: low voltage protection, high voltage protection, high temperature protection, short circuit protection, overload protection and buzzer alarm;

*The product through CE、ROHS certification.


Product Function         
1、Charging function
There are 2 modes as shown bellow:
1)PV charge the battery ,utility will not : when PV and utility are both connected to the machine , only the PV will charge the battery when there is sunlight ;
2)Both PV and utility will charge the battery : when PV and utility are both connected to the machine , AC(utility) will charge the battery . In the mean while , PV will also charge the battery if there is sunlight;
2、Utility as complementary power function
1)AC first ,DC standby UPS mode ;

When both utility and battery are connected to the machine , utility will supply power to the loads prior to the battery .When utility is cut off , the battery;

Step are as follows :
Step 1:When utility power is acailable , it will output directly after voltage being stabilized and charge batteries at the same time ;
Step 2:When utility power is cut off suddenly , the inverter will convent DC power to AC power automatically to ensure uninterrupted power supply within 3ms ;
Step 3:When utility power becones available again , it will automatically transter to utility supplying power to loads and charge batteries at the same time.
2)DC first,AC standby UPS mode ;
When both utility and battery are connected to the inverter , battery will supply power to the loads prior to utility . when battery capacity is not enough , utility will continue to supply power automatically ;
Step 1:When battery has enough power , it will supply power to the loass directly ;
Step 2:When battery does not have enough power , it will automatically transter to utility supplying power to the loads ;
Step 3:After the battery is fully charged (e.g.by solar or wind charge controller ),it will then automatically ranster to battery supplying power to the loads.

Model

CM0530

CM1030

CM1530

CM2030

CM3030

CM

4060

CM

5060

CM

6060

CM

7060

CM

801200

Rated power

500W

1000W

1500W

2000W

3000W

4000W

5000W

6000 W

7000W

8000W

Battery

Rated voltage

12V

24V

24V

48V

24V

48V

24V

48V

48V

24V

48V

Charging current

Max10A

Max15A

AC input

Voltage range

220VAC±20%

Frequency

50Hz±5Hz/60Hz±5Hz

AC output

Voltage range

220VAC±3%

Frequency

50/60Hz±1%(Inverter mode)

Output waveform

Pure sine wave

Conversion time

10msTypical load

Efficiency

85%80% Resistive load

Over load

110-120%/30s

Protection

Battery overvoltage and low voltage protection, overload protection, short circuit protection, over temperature protection

Display

LED+LCD

Cooling method

Forced air cooling

Operating temperature

0-40

Chassis sizemm

410*176*240mm

490*230*335mm

510*252*460mm

Package Sizemm

460*220*328mm

550*270*415mm

600*343*545mm

N.W.Kg

7.5

8.5

10

17

19

22

25.5

27

31

32

38

44

G.W.Kg

8.5

9.5

11

19

21

24

33

35

39

40

44

51


inquiry now

Subject : Hybrid inverter with built-in MPPT solar controller all on one

  • Please double check your mailbox for fear of any mistake.
Related Products
  • hybrid inverter 8kw to 20kw hybrid solar inverter with build in mppt controller all in one

    Full power hybrid solar inverter with build in mppt controller used for off grid solar system high quality inverter with CE ROSH certification can used as UPS inverter for home power system.

  • inverter wit controller Solar inverter built-in charge controller 12V/24V/48V/96V 300W-6KW

    300W to 6000W 12v/24v/48v/96v Solar inverter built-in charge controller, with RS 232 interface,with AC charger with ups,can set mains priority or inverter priority.

  • mppt solar controller JN-MPPT-A 10A 20A 30A 40A MPPT Solar Panel Battery Charge Controller 12V 24V 48V

    Extruded big aluminum heatsink dissipates heat quickly and take the latest shared-one-cathode circuit design.  The system voltage is 12v 24v 48v auto work. The controller choose MPPT charging, the efficiency is above 99.8%. Optional WIFI/ GPRS /PC host computer monitor, intelligent humanized control.

  • AC hybrid inverter JN-HS 2000w AC grid hybrid power inverter

    ·Small, light and artistic, benefited from adopting the SMD pastern technology. ·Cooling fan is intellectual controlled, and its working status is controlled by CPU, which mostly increased its service life and helps to save the power consumption, improve work efficiency and lower the working noise.

  • PWM Solar Charge Controller Lastest Design PWM Solar Charge Controller 150A 24V 48V 96V 110V 192V 220V 240V

    Latest JND-X series 150amp PWM solar charge controller is used in solar off-grid system (independent system), especially suitable for small off-grid solar power generation control system, which automatically adjusts charging and discharging. The battery charging process of the JND-X controller is optimized to extend battery life and improve system performance.

  • Off Grid solar power system home Off Grid solar power system home 300w,500w,1kw,2kw 3kw,4kw,5kw,8kw,10kw customized

    Off-grid solar power generator system using solar panels to converted into solar energy when there is light, then controller supply power for loads by charge and discharge and charge for battery as well.When it is raining or cloudy, battery can supply power to the DC load directly or charge for inverter and supply for AC loads.

  • mppt solar charge controller JN-MPPT-C 50A 60A 80A 100A MPPT solar charge controller 12V 24V 48V auto

    JN-MPPT-C sereis MPPT solar controller series ranges from 50a 60a 80a 100a, advanced MPPT maximum power point tracking technology,tracing efficiency more than 99.5%.

  • solar pv energy controller Solar charge controller 12V 24V 48V 30A 40A 50A 60A

    The JC series solar charge controller is a very important part of the solar system. It is the heart of the solar power system. JC series controller. It is use intelligence and automatically to control the charge, discharge and load of the system to supply perfect protection functions for the battery. So pv battery controller can make the battery work reliability and longer.

Newsletter

Sign up receive company information

Contact Us

PHONE/WHATSAPP :

+86157 0569 5515, +86159 5512 5448,+86152 5670 9748

Skype :

jngesunny

Address :

No. 99,Yonghe Road, high-tech Zone, Hefei city ,Anhui Province, China

Copyright © 2015-2020 Anhui JNGE POWER Co.,LTD.All Rights Reserved.Powered by dyyseo.com

Tel : +86157 0569 5515

Tel : +86159 5512 5448

Tel : +86152 5670 9748

Wechat : +86157 0569 5515, +86159 5512 5448,+86152 5670 9748

whatsapp : +86157 0569 5515

whatsapp : +86159 5512 5448

whatsapp : +86152 5670 9748

skype : jngesunny

skype : +86159 5512 5448

skype : +86152 5670 9748

Email : sunnytao@ahjnge.net.cn

Email : sales02@ahjnge.net.cn

Email : sales04@ahjnge.net.cn

contacts Home
收缩 展开
  • Subject
  • Tel
  • Email*
  • Message*
  • Please double check your mailbox for fear of any mistake.