Call Us Now! +86-0551-68564587

Order Online Now! sunnytao@ahjnge.net.cn

wind solar hybrid controller
Products
New Products
  • Solar hybrid solar inverter with built-in MPPT solar controller
    Solar hybrid solar inverter with built-in MPPT solar controller

    CM series has the advantages of high efficiency, low power consumption and strong carrying capacity and more intelligent, User can set charging mode according to the usage environment, and the AC complementary output, the mode of AC or DC, it has the advantages of stable quality, strong load resistance, anti-adverse environment and long service life; it is the main product of our company’s power frequency pure sine wave inverter.

  • 1kw 2kw 3kw 4kw 5kw 6kw 7kw Hybrid Solar Inverter With MPPT PWM Charge Controller All In One
    1kw 2kw 3kw 4kw 5kw 6kw 7kw Hybrid Solar Inverter With MPPT PWM Charge Controller All In One

    1.Industrial grade UO high density coil transformer Low no-load loss Lighter and more efficient 2.Dedicated DSP main control chip with SMT patch technology, strong shake resistance, ultra low heat 3.International thick wire large copper core, neat wiring, high pressure resistance, strong load capacity

  • dc to ac hybrid inverter
    Intelligent Low Frequency Hybrid Off-Grid Inverter Pure Sine Wave

    Intelligent low frequency hybrid off-grid inverter pure sine wave hybrid with double functions: solar and AC mains as UPS. Using toroidal transformer ,no-load loss at lowset and much more durable. Easy reading current datas from LCD display. Easy install and use for its reasonable design. Full protections for over load ,overheating and shortcircuit,over voltage ect,more safe

  • Solar battery 100ah 150ah 200ah 250ah rechargeable lead acid ,AGM, lithium ion battery
    Solar battery 100ah 150ah 200ah 250ah rechargeable lead acid ,AGM, lithium ion battery

    Energy storage battery mainly refers to the use of solar power generation equipment and wind power generation equipment and renewable energy energy storage battery. At present, the most common storage battery are GEL battery, lithium battery, AGM battery, lithium battery ect.

High-end type booster MPPT Solar Electric vehicle special controller 48v 60v 72v

This high end type MPPT booster Solar Electric vehicle special controller adopts common positive design and advanced MPPT control algorithm. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy.Also,it has USB output and DC supply interface to meeting your multiple needs.

  • Place of Origin:

    China
  • Brand Name:

    JNGE POWER
  • Rated Voltage:

    48v 60v 72v
  • Net weight:

    0.65
  • Certification:

    CE
  • Warranty:

    3years
contact now
  • product introduction
  • More Details

High-end type MPPT solar Electric vehicle special controller with USD and DC supply


Main feature:

1.High performance booster MPPT charging ways.

2. The system uses solar panel power supply, reduce the power consumption of the battery.

3. The LED status indicator.

4. Digital tube current-time display charging current, battery voltage, and solar energy input voltage, running status be clear at a glance.

5.Complete over-charge, anti-recoil, anti-reverse, and short circuit protection.

6. The DC 12V 6W output load, and humanized design USB output, the users can directly connect the USB interface to charge their phone.

7.Internal uses short-circuit jump needle design, can easily switch 48v and 60v battery (Order 72v battery need explain in advance).

8. The system USES a fool type design, the user does not need any settings.

9. The system USES RJ45 communication interface, to realize the remote monitoring.

10. One-click system reset function, add a layer of protection for the system.


Technical parameter :

PV open circuit voltage

16V50V

MPPT Voltage range

16V45V

MPPT efficiency

≥99%

Efficiency

≥95%

 No-load loss

< 5mA

Solar max. input power

18V200W,36V400W

Communication distance

≥5m

Battery

48Vor 60Vor 72V

Over-voltage protection

48V-58V60V-72V,72V-87V

12VDC power

6W

USB charge power

5W

system reset

One-click reset

Anti-reverse protection

When the battery positive and negative reverse connection, the fuse will fuse, the user to replace 10A, φ5×20 glass tube fuse.

Working temperature

-35℃ - +65℃

Net Weight/

Gross weight

0.65Kg

0.90Kg

Size

153×111×43(mm)

                         

Related products:



3KW offgrid solar system                   PWM solar controller auto           Metal solar power controller                   wind PV hybrid controller 

Safety recommendations

1. The controller can be adaptive to the 12V and 24V PV panels, please do not use the open circuit voltage above 50V PV panels, otherwise there will be the risk of burning.

2. The controller inside not have the parts need to maintain and repair, and contains safe voltage higher than the human body, please don't take apart the controller.

3. Please do not use water or corrosive liquids into the controller, and they might damage the controller.

4. Battery 48V, 60V or 72V, battery terminal voltage are both more than the human safety voltage,when you operation it, pay attention to use insulated tools, and maintain the necessary dry.

5. The battery connect reverse or short circuit, the current is large, the controller will not damage, but the fuse will melt, accompanied by strong spark phenomenon at the same time, this time the impact on the battery and your equipment are high, please try to avoid the happening of this kind of situation.

6. The battery may produce flammable gas, please stay away from sparks.


Installation and wiring               

                                                                        Dimensions: 153*111*43 (mm)  

                                                                         Installation size: 130*103 (mm)
                                                                        Install Aperture: 3.5 (mm)

                                           

1.The controller can charge for 48V,60V and 72V battery,using one-click setting output voltage grade, the set method as follows:

 

When the system startup is completed, long press "set" button for 5 ~ 10 seconds, digital tube display "H48. F" said now for 48V mode, as shown in the figure below:

 

Please waiting for 5 seconds, the digital tube out, the system is working in 48V mode, and by the same way, once again long press "set" button, you can set the 60V and 72V model, the set button loop set up 48V, 60V and 72V model.As shown in the figure below:

 

3.The solar panels "+"pole connect the controller solar red line.The controller's mask marked the solar terminal and battery terminal,please don't inversely connect, solar terminal cable for φ10mm,battery terminal cable for φ8mm.

4.The solar panels "-"pole connect to the controller solar black line.

5.The battery "+"pole connect the controller battery red (or brown) line

6.The battery”-”pole connect the controller “battery” black(or blue) line,after wiring is normal, if there is the sun, the controller starts to work.

 

 


inquiry now

Subject : High-end type booster MPPT Solar Electric vehicle special controller 48v 60v 72v

  • Please double check your mailbox for fear of any mistake.
Related Products
  • solar mppt controller for electric car motor Simple type booster MPPT Solar Electric vehicle special controller 48v 60v 72v

    Simple type booster MPPT Solar Electric vehicle special controller is a sophisticated  solar charge controller family  for low cost appl ications.The electronic circui t is equipped with a microcontrol ler that provides high-efficiency charging  technology together with a number of outstanding status display, warning and safety functions.

  • manual pwm solar charge controller Solar Charge Controller 12V 24V 5A 10A 15A 20A with waterproof for street lamp or ourdoor use

    JN-W series 12V/24V automatic identification, 5A 10A 15A 20A solar controller for pv system with IP68 protection level,can be used on household and street light.aluminum design, can effectively prevent all forms of corrosion. 12V/24V automatic identification system voltage.LED digital display and waterproof solar controller for batteries keyboard operation, using simple and quick.Improved three-step charging algorithm, once a week the battery equalizing charge, effectively prevent the battery inequality and sulfuration, improve battery life.

  • AC hybrid inverter JN-HS 500w AC hybrid DC power inverter

    1. High conversion efficiency, smart soft start function. 2. Multiple safe protections 3. Input and output are completely independent 4. Smart, light,and portable,designed for home use. 5. Universal socket, suitable for all kinds of plugs 6. Pure sine waveform output 7. Applicable for resistive/sensitive loads 8. High-procision voltage stability technology 9. Aerospace-grade silence technology 10. Cooler of fan and working status are intellectually controlled by MCU, which mostly prolongs its service life and helps to save the power consumption

  • 800 power inverter 800w inverter 12V 24V DC to 100/110/120/220/230/240V AC power inverter generator for house appliance and car

    1. By using the advanced Double-CPU single chip intelligent control technology, with the features of high reliability and low failure; 2. Pure sine wave output, inverter with strong load capacity and wide applications; 3. Perfect protection functions (Overload protection, Internal over-temperature protection, Output short-circuit protection, Input under-voltage protection, Input over-voltage protection, etc) largely improve products’ reliability; 4. Internal CPU centralized control and SMD Technology allow small size and light weight; 5. By CPU controlling the working state of cooling fan, its intelligent control can largely prolong the fan’s service life, save energy, and improve the working efficiency; 6. Small working noise,and high efficiency.

  • 300w portable off-grid solar home lighting system - 20AH Battery,300W pure sine wave inverter and  12V/10A solar controller 300w portable off-grid solar home lighting system - 20AH Battery,300W pure sine wave inverter and 12V/10A solar controller

    Solar Home Power System 12V/20AH-300W 300w protable off-grid solar home lighting system - 20AH Battery,300W pure sine wave inverter and 12V/10A solar controller.

  • Low frequency pure sine wave power inverter 300W-20KW Low frequency pure sine wave power inverter 300W-20KW

    Low-frequency inverters have a few advantages compared to higher frequency inverters; namely their peak power capacity and their reliability. Low-frequency power inverters can operate at a peak power level of up to 300% of their nominal power level for several seconds, while high-frequency inverters can operate at 200% of nominal power for a fraction of a second. Low frequency inverters operate using transformers (as opposed to electronic components such as MOSFETs for high frequency inverters). This results in a stronger, sturdier inverter which is less prone to damage.

  •  AC DC hybrid inverter JN-HS 600W Pure Sine Wave Hybrid power inverter

    1.Soft start:smooth start-up of appliances 2.Pure sine wave output waveform 3.DC/AC Isolated for Pure Sine Wave power inverter 4.Universal Protection Circuit:Over-voltage,thermal protection,earth fault protection,overload protection,bat.Polarity reverse protection,low voltage protection 5.Low interference Technology 6.With power ON/OFF switch and Two-color LED indicator:Power,Fault 7.The surge power twice as rated power 8.Thermal Methods:cooling fans,30% load auto.on 9.Three years warranty

  • 12v 24v 48v auto 10a 20a 30a PWM soalr panel charge controllers JN-K Series 10a 20a 30a solar controller

    Solar panels may make power at very high voltage and current. If all that is fed directly to the battery then it may get overcharged or blast (in extreme cases).A solar charge controller prevents this from happening. It is is placed in between the solar panels and the battery bank to regulate the charging current and voltage of the batteries through solar. It also prevents the reverse flow of current from batteries to the solar panels during night-time.Basically, without a charge controller it is not possible to safely use solar energy for charging batteries.

Newsletter

Sign up receive company information

Contact Us

PHONE/WHATSAPP :

+86-15705695515

Skype :

jngesunny

Address :

No. 99,Yonghe Road, high-tech Zone, Hefei city ,Anhui Province, China

Copyright © 2015-2019 Anhui JNGE POWER Co.,LTD.All Rights Reserved.Powered by dyyseo.com

Tel : +86-0551-68564587

Wechat : 15705695515

skype : jngesunny

Email : sunnytao@ahjnge.net.cn

contacts Home
收缩 展开
  • Subject
  • Tel
  • Email*
  • Message*
  • Please double check your mailbox for fear of any mistake.