Call Us Now! +86-15705695515

Order Online Now! sunnytao@ahjnge.net.cn

wind solar hybrid controller
Products
New Products
  • wind solar hybrid charge controller
    The Latest Privilege Version MPPT Wind Solar Hybrid Charge Controller With Wifi/ GPRS Monitor

    > Remote Monitoring by 3 ways: PC monitoring; WIFI by mobile phone; GPRS by mobile phone. >This new wind solar hybrid controller is special design for 0-800w wind and 0-600w solar panels for wind >solar street light or home wind solar complementary system. >Appearance is elegant, operations are easy. Uses a custom digital LCD screen can see solar panel ,wind turbine, battery status and four key operation mode. The user to use simple and easy to use, popular and  >The inner circuit board of the controller is sprayed to prevent dust, moisture and static electricity, which can effectively prolong the controller' service life. >This controller can workable to Gel, Lead-acid, Ternary lithium battery and Lithium iron phosphate battery. >Lightning counter-attack, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, etc.

  • MPPT solar charge controller
    Mini MPPT Solar Charge Controller 10amp 20amp 30amp for solar power system

    Latest JN-MPPT-Mini MPPT solar charge controller ranges from 10amp 20amp 30amp with mini smart design for various use purpose . The battery system voltage is 12v 24v 48v auto recognize and max. PV input can be 150V. High charge efficiency is above 99.8% which is much cost-effective for project.

  • MPPT solar charge controller
    Latest MPPT Solar Charge Controller 30amp 40amp 50amp for solar power system

    Latest JN-MPPT-AL MPPT solar charge controller ranges from 30amp 40amp 50amp which are used for solar panel system . The battery system voltage is 12v 24v 48v auto recognize and max. PV input can be 150V. High charge efficiency is above 99.8% which is much cost-effective for project.

  • PWM Solar Charge Controller
    Lastest Design PWM Solar Charge Controller 100A 24V 48V 96V 110V 192V 220V 240V

    Latest JND-X series PWM solar charge controller is used in solar off-grid system (independent system), especially suitable for small off-grid solar power generation control system, which automatically adjusts charging and discharging. The battery charging process of the JND-X controller is optimized to extend battery life and improve system performance.

1kw 2kw 3kw 4kw 5kw 6kw 7kw 8kw Hybrid Solar Inverter With MPPT PWM Charge Controller All In One

1.Industrial grade UO high density coil transformer Low no-load loss Lighter and more efficient

2.Dedicated DSP main control chip with SMT patch technology, strong shake resistance, ultra low heat
3.International thick wire large copper core, neat wiring, high pressure resistance, strong load capacity

  • Place of Origin:

    Hefei,China
  • Brand Name:

    JNGE POWER
  • Model Number :

    JN-W10
  • Application:

    off-grid Solar system
  • Rated Voltage:

    12v 24v 48v 96v
  • Certification:

    CE ROHS
contact now
  • product introduction
  • More Details

1.Pure sine wave output; Industrial high efficiency I-shape transformer; 

2.AC charge current 0-30A adjustable; AVR output; Built-in MPPT or PWM solar charge controller optional; 3.Integrated LCD display; One-button start with an external display screen( optional); Three types working modes:AC first, DC first, energy-saving mode; 

4.Supports diesel or gasoline generator, adapt anytough electricity situation; Various communication ports and remote controls (RS232/RS485/APP/SNMP/GSM optional).


Product Parameters
Specification
Model: W10 10212/24 15212/24 20212/24/48 30224/48 40224/48 50248 60248 70248/96
Rated Power 1000W 1500W 2000W 3000W 4000W 5000W 6000W 7000W
Battery Voltage 12/24VDC 12/24/48/96VDC 24/48/96VDC 48/96VDC 48/96VDC
Size(L*W*Hmm) 595*315*225 647*315*235
Packing Size(L*W*Hmm) 660*385*350 715*385*350
N.W.(kg) 17 24 26 29 41.5 42.5 45.5 48
G.W.(kg)(Carton Packing) 20 27 29 32 45 46 49 52
Parameter
Input DC Input Voltage Range 10.5-15VDC(Single battery voltage)
AC Input Voltage Range 85VAC~138VAC /89VAC~144VAC /  93VAC~150VAC / 170VAC~275VAC / 178VAC~288VAC /186VAC~300VAC
AC Input Frequency Range 45Hz~65Hz
Output Efficiency ≥85%
Output Voltage(Battery Mode) 110VAC±2% / 115VAC±2% / 120VAC±2% / 220VAC±2% / 230VAC±2% / 240VAC±2% 
Output Frequency(Battery Mode) 50/60Hz±1%
Output Wave(Battery Mode) Pure Sine Wave
AC Output Voltage Range 110VAC±10% / 115VAC±10% / 120VAC±10% / 220VAC±10% / 230VAC±10% / 240VAC±10% 
AC Output Frequency Range Tracking Automatically
Inside Solar controller
(Optional)
Charging Mode MPPT or PWM
Charging current 10A,20A,30A,40A,50A,60A
PV Input Voltage Range 12V System:15V-44V;24V System:30V-44V;48V System:60V-88V
Max PV Input Voltage
(At 25℃)
12V/24V System:50V;48V System:100V
PV Array Maximum Power 12V System:140W,280W,420W,560W,700W,840W;
24V System:280W,360W,840W,1120W,1400W,1680W;
48V System:560W,1120W,1680W,1120W,2240W,3360W
Working Mode Battery First/AC First/Saving Energy Mode
AC Charging current(selectable) 0~30A
Transfer Time ≤4ms
Display LCD(External LCD Display(Optional))
Thermal method Cooling fan in intelligent control
Battery Type
(selectable)
LEAD Charge Voltage:14V;Float Voltage:13.8V(Single battery voltage,x2 for 24V; x4 for 48V)
OP-LE Charge Voltage:14.2V;Float Voltage:13.8V(Single battery voltage,x2 for 24V; x4 for 48V)
LITHIUM Charge Voltage:13V;Float Voltage:12.6V(Single battery voltage,x2 for 24V; x4 for 48V)
Remark The charging parameters of other types battery can be user-defined
Protection Over-load / Over-discharge / Short circuit / High temperayure / Reverse polarity
Communication RS232/RS485/APP/SNMP/GSM(Optional)
Environment Noise ≤55dB
Temperature -10℃~40℃
Humidity 0~95%( No condensation)
Note: All specifications are subject to charge without prior notice


inquiry now

Subject : 1kw 2kw 3kw 4kw 5kw 6kw 7kw 8kw Hybrid Solar Inverter With MPPT PWM Charge Controller All In One

  • Please double check your mailbox for fear of any mistake.
Related Products
  • dc to ac inverter 3 phase DC to AC 3 phase inverter off grid pure sine wave

    Full power three phases pure sine wave inverter used for off grid wind and solar system high quality inverter with CE ROSH certification can used as UPS inverter for industry.

  • Low frequency pure sine wave power inverter 300W-20KW Low frequency pure sine wave power inverter 300W-20KW

    Low-frequency inverters have a few advantages compared to higher frequency inverters; namely their peak power capacity and their reliability. Low-frequency power inverters can operate at a peak power level of up to 300% of their nominal power level for several seconds, while high-frequency inverters can operate at 200% of nominal power for a fraction of a second. Low frequency inverters operate using transformers (as opposed to electronic components such as MOSFETs for high frequency inverters). This results in a stronger, sturdier inverter which is less prone to damage.

  • dc to ac hybrid inverter Intelligent Low Frequency Hybrid Off-Grid Inverter Pure Sine Wave

    Intelligent low frequency hybrid off-grid inverter pure sine wave hybrid with double functions: solar and AC mains as UPS. Using toroidal transformer ,no-load loss at lowset and much more durable. Easy reading current datas from LCD display. Easy install and use for its reasonable design. Full protections for over load ,overheating and shortcircuit,over voltage ect,more safe

  • 2000w inverter pure sine wave inverter 2000w DC-AC high frequency pure sine wave power inverter

    AC ouput 100-240V/50Hz or 60HZ inverter Conversion efficiency up to 90% Low interference technology Soft start function Same size, light weight, faint noise ,free maintenance

  • mppt solar charge controller JN-MPPT-C 50A 60A 80A 100A MPPT solar charge controller 12V 24V 48V auto

    JN-MPPT-C sereis MPPT solar controller series ranges from 50a 60a 80a 100a, advanced MPPT maximum power point tracking technology,tracing efficiency more than 99.5%.

  • MPPT solar charge controller Latest MPPT Solar Charge Controller 50amp 60amp 80amp 100amp 120amp for solar panel system

    Latest JN-MPPT-CL MPPT solar charge controller ranges from 50amp 60amp 80amp 100amp 120amp which are used for solar panel system . The battery system voltage is 12v 24v 48v auto recognize and max. PV input can be 150V. High charge efficiency is above 99.8% which is much cost-effective for project.

  • solar mppt controller for electric car motor Simple type booster MPPT Solar Electric vehicle special controller 48v 60v 72v

    Simple type booster MPPT Solar Electric vehicle special controller is a sophisticated  solar charge controller family  for low cost appl ications.The electronic circui t is equipped with a microcontrol ler that provides high-efficiency charging  technology together with a number of outstanding status display, warning and safety functions.

  • AC hybrid inverter JN-HS 500w AC hybrid DC power inverter

    1. High conversion efficiency, smart soft start function. 2. Multiple safe protections 3. Input and output are completely independent 4. Smart, light,and portable,designed for home use. 5. Universal socket, suitable for all kinds of plugs 6. Pure sine waveform output 7. Applicable for resistive/sensitive loads 8. High-procision voltage stability technology 9. Aerospace-grade silence technology 10. Cooler of fan and working status are intellectually controlled by MCU, which mostly prolongs its service life and helps to save the power consumption

Newsletter

Sign up receive company information

Contact Us

PHONE/WHATSAPP :

+86-15705695515

Skype :

jngesunny

Address :

No. 99,Yonghe Road, high-tech Zone, Hefei city ,Anhui Province, China

Copyright © 2015-2020 Anhui JNGE POWER Co.,LTD.All Rights Reserved.Powered by dyyseo.com

Tel : +86-15705695515

Wechat : +86-15705695515

whatsapp : +86-15705695515

skype : jngesunny

Email : sunnytao@ahjnge.net.cn

contacts Home
收缩 展开
  • Subject
  • Tel
  • Email*
  • Message*
  • Please double check your mailbox for fear of any mistake.