Call Us Now! +86-0551-68564587

Order Online Now!

wind solar hybrid controller
New Products

High-end type booster MPPT Solar Electric vehicle special controller 48v 62v 72v

This high end type MPPT booster Solar Electric vehicle special controller adopts common positive design and advanced MPPT control algorithm. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy.Also,it has USB output and DC supply interface to meeting your multiple needs.

  • Place of Origin:

  • Brand Name:

  • Rated Voltage:

    48v 62v 72v
  • Net weight:

  • Certification:

  • Warranty:

contact now
Product Detail

High-end type MPPT solar Electric vehicle special controller with USD and DC supply

Main feature

1.High performance booster MPPT charging ways.

2. The system uses solar panel power supply, reduce the power consumption of the battery.

3. The LED status indicator.

4. Digital tube current-time display charging current, battery voltage, and solar energy input voltage, running status be clear at a glance.

5.Complete over-charge, anti-recoil, anti-reverse, and short circuit protection.

6. The DC 12V 6W output load, and humanized design USB output, the users can directly connect the USB interface to charge their phone.

7.Internal uses short-circuit jump needle design, can easily switch 48v and 60v battery (Order 72v battery need explain in advance).

8. The system USES a fool type design, the user does not need any settings.

9. The system USES RJ45 communication interface, to realize the remote monitoring.

10. One-click system reset function, add a layer of protection for the system.

Use advice

1.Please do not overload use the controller, 18V PV panels maximum power is 200W, if you have two pieces of 18V PV panels please in series use them;36V PV panels maximum power is 400W, if more than 2 pieces PV panels,please used them in parallel.(PV panels parameters: working voltage is 18V, open circuit voltage is 22V, working voltage is 36V,open circuit voltage is 44V. please look at the PV panels on the back of the parameters then connection it.)

2.The controller will heat during operation, please installed in the ventilation and heat dissipation of the environment.

3. When use the system, suggested between the battery and controller and solar panels and controller in series a switch, Otherwise, when connection will appear lighter phenomenon;at the same time to switch on the system safety is guaranteed.

4. The system input and output is isolation design, when using it,the together with the positive or negative are both wrong.

5. The full battery is very important, be filled once a month at least, otherwise the battery will be suffering permanent damage.Only when entering the battery energy than load use of energy, the battery can be filled.When the user configuration system, please keep this in mind.

System operation and status indication

1. The system normal, if there is the sun, the system to start, LED lights blink a few times after digital tube bright, system start-up.

2. After the system start-up, digital tube loop display the  battery voltage,solar input voltage, charging current, the LED normal instructions.Note: when the PV panel’s input power is less than 35W, will be close the LED’s in order to save energy, but the digital tube also normal display.

3. When the system anomaly, press the “reset” button for 3 seconds to loosen, the system automatically reset.

4.Status indication, shown in the table below:

display content


·         statement


LED lights


Solar panels to access


Battery charge

Digital tube first


Battery voltage


Solar panels input voltage


Charging current

VI.Technical parameter

PV open circuit voltage


MPPT Voltage range


MPPT efficiency




 No-load loss

< 5mA

Solar max. input power


Communication distance



48Vor 60Vor 72V

Over-voltage protection


12VDC power


USB charge power


system reset

One-click reset

Anti-reverse protection

When the battery positive and negative reverse connection, the fuse will fuse, the user to replace 10A, φ5×20 glass tube fuse.

Working temperature

-35℃ - +65℃

Net Weight/

Gross weight





Safety recommendations

1. The controller can be adaptive to the 12V and 24V PV panels, please do not use the open circuit voltage above 50V PV panels, otherwise there will be the risk of burning.

2. The controller inside not have the parts need to maintain and repair, and contains safe voltage higher than the human body, please don't take apart the controller.

3. Please do not use water or corrosive liquids into the controller, and they might damage the controller.

4. Battery 48V, 60V or 72V, battery terminal voltage are both more than the human safety voltage,when you operation it, pay attention to use insulated tools, and maintain the necessary dry.

5. The battery connect reverse or short circuit, the current is large, the controller will not damage, but the fuse will melt, accompanied by strong spark phenomenon at the same time, this time the impact on the battery and your equipment are high, please try to avoid the happening of this kind of situation.

6. The battery may produce flammable gas, please stay away from sparks.

Installation and wiring               

                                                                        Dimensions: 153*111*43 (mm)  

                                                                         Installation size: 130*103 (mm)
                                                                        Install Aperture: 3.5 (mm)


1.The controller can charge for 48V,60V and 72V battery,using one-click setting output voltage grade, the set method as follows:


When the system startup is completed, long press "set" button for 5 ~ 10 seconds, digital tube display "H48. F" said now for 48V mode, as shown in the figure below:


Please waiting for 5 seconds, the digital tube out, the system is working in 48V mode, and by the same way, once again long press "set" button, you can set the 60V and 72V model, the set button loop set up 48V, 60V and 72V model.As shown in the figure below:


3.The solar panels "+"pole connect the controller solar red line.The controller's mask marked the solar terminal and battery terminal,please don't inversely connect, solar terminal cable for φ10mm,battery terminal cable for φ8mm.

4.The solar panels "-"pole connect to the controller solar black line.

5.The battery "+"pole connect the controller battery red (or brown) line

6.The battery”-”pole connect the controller “battery” black(or blue) line,after wiring is normal, if there is the sun, the controller starts to work.




Related products:

3KW offgrid solar system                   PWM solar controller auto           Metal solar power controller     wind PV hybrid controller 

Related Products

Sign up receive company information

Contact Us



Skype :


Address :

No. 99,Yonghe Road, high-tech Zone, Hefei city ,Anhui Province, China

Copyright © 2015-2018 Anhui JNGE POWER Co.,LTD.All Rights Reserved.Powered by

Tel : +86-0551-68564587

Wechat : 15705695515

skype : jngesunny

Email :

contacts Home
收缩 展开
  • Subject
  • Tel
  • Email*
  • Message*