Call Us Now! +86-0551-68564587

Order Online Now! sunnytao@ahjnge.net.cn

wind solar hybrid controller
Products
New Products

1000w 12v 24v 48vdc-110v 220vac off grid pure sine wave inverter

500w pure sine wave power inverter AC 12v 24v to DC 100v 110v 120v 220v 230v 240v

CE ROHS Certification

3 years warranty

  • Place of Origin:

    China
  • Brand Name:

    JNGE
  • Model Number :

    JN-H1000W
  • Application:

    off-grid Solar and wind system
  • Certification:

    CE ROHS
  • Warranty:

    3
contact now
Product Detail

1000w 1kw 12v 24v 48v dc-110v 220v ac off grid pure sine wave inverter factory



1000W pure sine wave inverter supplier

   1. Pure sine wave inverter

   2. AC Direct Connect Terminal!

   3. Fault work LED indicator for.

   4. AC receptacle that can be used with any separate spliter to provide even more outlets.

   5. On/off switch.

   6. Over Temperature protection inverer

   7. Over Load protection.

   8. Intelligent cooling.

   9. Internally fuse protected.

  10. Ac output short circuit protection.

  11. Auto reset on most fault conditions.

   12. inverter manual.

   13. 3 Year Warranty Parts and Labor




OUTPUT OUTPUT VOLT 100/110/120/220/230/240VAC
CONTINUOUS POWER 1000W
SURGE POWER 2000W
WAVEFORM PURE SINE WAVE
FREQUENCY 50Hz/60Hz
AC REGULATION LOW & HIGH 10%
   Non-load  Consumption <10W
EFFICEINCY >90%
INPUT USB OUTPUT 5V
DC VOLTAGE LED DISPLAY POWER & FAIL STATUS
INPUT RANGE  10-15V   21-30V   40-60V
PROTECTION WORKING INPUT 12V           24V     48VDC
FUSE 25A           20A     15A
Low battery alarm 10.5±0.5V   *2         *4
Low battery shut down 10±0.5V    *2         *4
Over voltage shut down 15.5±0.5V   *2       *4
Over load shut down 1200W over 10 seconds
Over heating shut down >75
Over Thermal  shut down the output
Working Temperature BETWEEN -10 and +50
soft start
OTHER DIMENSION(L*W*H)  305*146*66mm
INNER BOX DIMENSION  360*185*115mm
CARTON DIMENSION  495*195*380mm
NET WEIGHT 2.8±0.2KG
GROSS WEIGHT 13±1KG
PACKING 4PCS/CTN






Connection Steps:

(1)Check if all the components are all included. Such as, enclose bags and use manual. At the same time inspect whether battery voltage is accordance with the rated input voltage.

Enough current should be offered from the input battery voltage. Details calculate is that the output power /input voltage/0.85=output current

For example: load of 1000w, the output voltage is 12v, so the input current =1000/12/0.85=98 (Ampere).

Appropriate connection wires should be chosen according to the current rule that within 1 meter 8A/mm. 12mm connect wires should be regarded as the 1000w inverter with input voltage 12v. Others must also match with each other.

2) The GND wire of inverter should be connected to ground firstly before using. Do not regarded zero wire as the ground connect line.

3) Close the power of inverter, ie, press down the button “OFF”

4) Confirm the positive and negative polarity of battery, high voltage is the positive and low one is negative

5) Pull out the inverter input terminal, red means positive polarity (+) and black refers to negative polarity (-).

6) Choosing the suitable black area line according to the first step and then connect to black wire of inverter input terminal and pull tight at last.

7Choosing the suitable red area line according to the first step and then connect to red wire of inverter input terminal and pull tight at last.

8) Connect the black wire on the other side of the battery negative pole and ensure connection is firm.

9) Connect the red wire on the other side of the battery positive pole and make sure connection is firm.

10) Check and make sure all the connection are in right order and then the inverter power, just press the button “ON” is ok.

11) Inverter will get stable alternate current within 5 seconds after green led of inverter turn on.

12) The power of electronic equipment which connected to the AC socket of inverter shouldn’t be exceed rated power of inverter.

13) Press the button “ON” and then the power switch of load will be opened.


inquiry now

Subject : 1000w 12v 24v 48vdc-110v 220vac off grid pure sine wave inverter

Related Products
Newsletter

Sign up receive company information

Contact Us

PHONE/WHATSAPP :

+86-15705695515

Skype :

jngesunny

Address :

No. 99,Yonghe Road, high-tech Zone, Hefei city ,Anhui Province, China

Copyright © 2015-2017 Anhui JNGE POWER Co.,LTD.All Rights Reserved.Powered by dyyseo.com

Tel : +86-0551-68564587

whatsapp : +86-15705695515

skype : jngesunny

Email : sunnytao@ahjnge.net.cn

contacts Home
收缩 展开
  • Subject
  • Email*
  • Message*